The Eris LED 10W Projector is equipped with 3 pyro motion sensors with 360º PIR (Passive Infra Red) technology that detects the invisible heat emitted by moving objects (people, animals, etc.).
The heat is detected and electronically converted into a signal that turns on the projector.
Heat is not detected through obstacles such as walls or glass panels.
This sensor constantly monitors the pre-set operating zone and immediately turns on the light when it detects movement in that area.
This means that whenever motion is detected within the sensor's range, the light will automatically turn on to illuminate paths, steps, patios, porches or any selected area, for safety or convenience reasons.
As long as there is movement within the sensor's range, the light will remain on.
Ideal for wall installation indoors or outdoors Projector with LED panel with 360º rotation.
| Attribute name | Attribute value |
|---|
| Sensor type | Infrared |
| Power | 10W |
| Lumens | 900lm |
| Kelvin | 5000K |
| Voltage | 220V/AC-240V/AC / 50HZ |
| Detection angle | 360º |
| Detection range | 12m |
| Type of protection | IP54 |
| Impact protection | IK05 |
| Twilight Regulation | 3 - 2000 Lux |
| Time adjustment | 10 seg - 10 min |
| Ideal mounting height | 1.8m - 8m -> wall |
| Application | Salient - wall |
| Measures | 230mm x 140mm |
| Color | White or black |
