The wall light contains the LEDs (4pcs 0.5W LED), the motion sensor and the battery (Li rechargeable battery, 3.7V, 2600mAh).
When determining where to mount this unit, consider the motion sensor with max. 8 meters (in front of the light) and around 120º (horizontal) at 25 ºC ambient temperature. The unit's detection range may change with changing temperature, mounting height and location.
All passive infrared detectors are more sensitive in cold, dry weather than hot, humid weather.
The solar cell is the main source of energy for the Jupiter Silver Solar Wall Light. It converts the energy from sunlight into electricity, which charges the battery in the main unit.
Direct sunlight is required on the surface of the solar cell for as long as possible during the day.
The angle of the solar cell should be adjusted so that it faces as much direct sunlight as possible.
The battery may take approx. 3 days to fully charge.
It will last 4 hours if operated with 100% light and approx. 40 hours of stand-by.
Allows 3 different programs: AUTO mode – the sensor is active, when it detects movement, it turns on the light at 100% - 160 lumens | 10% mode - minimum light, when movement is detected it goes to 100% | OFF mode – apply off.
Optional accessory - pole - 072068
